You are required to read and agree to the below before accessing a full-text version of an article in the IDE article repository.
The full-text document you are about to access is subject to national and international copyright laws. In most cases (but not necessarily all) the consequence is that personal use is allowed given that the copyright owner is duly acknowledged and respected. All other use (typically) require an explicit permission (often in writing) by the copyright owner.
For the reports in this repository we specifically note that
- the use of articles under IEEE copyright is governed by the IEEE copyright policy (available at http://www.ieee.org/web/publications/rights/copyrightpolicy.html)
- the use of articles under ACM copyright is governed by the ACM copyright policy (available at http://www.acm.org/pubs/copyright_policy/)
- technical reports and other articles issued by M‰lardalen University is free for personal use. For other use, the explicit consent of the authors is required
- in other cases, please contact the copyright owner for detailed information
By accepting I agree to acknowledge and respect the rights of the copyright owner of the document I am about to access.
If you are in doubt, feel free to contact webmaster@ide.mdh.se
Experiences from Introducing State-of-the-art Real-Time Techniques in the Automotive Industry
Publication Type:
Conference/Workshop Paper
Venue:
Eigth IEEE International Conference and Workshop on the Engineering of Compute-Based Systems
Publisher:
IEEE Computer Society
Abstract
The use of state-of-the-art real-time techniques in industry remains infrequent. The reason for this, we believe, is three-fold: (1) the lack of commercially available tools, (2) the lack of methodologies based on real-time theory throughout the complete development process, and (3) the lack of competence in real-time theory among industrial practitioners.
In this paper we present a case study of the introduction of state-of-the-art real-time techniques in industry. The case study was performed as a collaboration between Mälardalen University and the industrial partners Volvo Construction Equipment Components AB (VCE) and TietoEnator ArosTech AB. VCE develops computer control systems for construction equipment vehicles, such as wheel loaders, graders, and articulated haulers. TietoEnator ArosTech is a firm of consultants with recognized competence in the field of embedded real-time systems.
The contribution of this paper consists of the findings from the introduction of a method and real-time techniques into an industrial project. The main result reported can be summarized as
Bibtex
@inproceedings{Norstrom263,
author = {Christer Norstr{\"o}m and Mikael Gustafsson and Kristian Sandstr{\"o}m and Jukka M{\"a}ki-Turja and Nils-Erik B{\aa}nkestad},
title = {Experiences from Introducing State-of-the-art Real-Time Techniques in the Automotive Industry},
month = {April},
year = {2001},
booktitle = {Eigth IEEE International Conference and Workshop on the Engineering of Compute-Based Systems},
publisher = {IEEE Computer Society},
url = {http://www.es.mdu.se/publications/263-}
}