You are required to read and agree to the below before accessing a full-text version of an article in the IDE article repository.

The full-text document you are about to access is subject to national and international copyright laws. In most cases (but not necessarily all) the consequence is that personal use is allowed given that the copyright owner is duly acknowledged and respected. All other use (typically) require an explicit permission (often in writing) by the copyright owner.

For the reports in this repository we specifically note that

  • the use of articles under IEEE copyright is governed by the IEEE copyright policy (available at
  • the use of articles under ACM copyright is governed by the ACM copyright policy (available at
  • technical reports and other articles issued by M‰lardalen University is free for personal use. For other use, the explicit consent of the authors is required
  • in other cases, please contact the copyright owner for detailed information

By accepting I agree to acknowledge and respect the rights of the copyright owner of the document I am about to access.

If you are in doubt, feel free to contact

Weight-Bearing Estimation for Cane Users by Using Onboard Sensors


Joaquin Ballesteros, Alberto Tudela , Juan Rafael Caro-Romero , Cristina Urdiales

Research group:

Publication Type:

Journal article


Sensors Journal


Mobility is a fundamental requirement for a healthy, active lifestyle. Gait analysis is widely acknowledged as a clinically useful tool for identifying problems with mobility, as identifying abnormalities within the gait profile is essential to correct them via training, drugs, or surgical intervention. However, continuous gait analysis is difficult to achieve due to technical limitations, namely the need for specific hardware and constraints on time and test environment to acquire reliable data. Wearables may provide a solution if users carry them most of the time they are walking. We propose to add sensors to walking canes to assess user’s mobility. Canes are frequently used by people who cannot completely support their own weight due to pain or balance issues. Furthermore, in absence of neurological disorders, the load on the cane is correlated with the user condition. Sensorized canes already exist, but often rely on expensive sensors and major device modifications are required. Thus, the number of potential users is severely limited. In this work, we propose an affordable module for load monitoring so that it can be widely used as a screening tool. The main advantages of our module are: (i) it can be deployed in any standard cane with minimal changes that do not affect ergonomics; (ii) it can be used every day, anywhere for long-term monitoring. We have validated our prototype with 10 different elderly volunteers that required a cane to walk, either for balance or partial weight bearing. Volunteers were asked to complete a 10 m test and, then, to move freely for an extra minute. The load peaks on the cane, corresponding to maximum support instants during the gait cycle, were measured while they moved. For validation, we calculated their gait speed using a chronometer during the 10 m test, as it is reportedly related to their condition. The correlation between speed (condition) and load results proves that our module provides meaningful information for screening. In conclusion, our module monitors support in a continuous, unsupervised, nonintrusive way during users’ daily routines, plus only mechanical adjustment (cane height) is needed to change from one user to another.


author = {Joaquin Ballesteros and Alberto Tudela and Juan Rafael Caro-Romero and Cristina Urdiales},
title = {Weight-Bearing Estimation for Cane Users by Using Onboard Sensors},
isbn = {1424-8220},
volume = {18},
number = {4},
month = {January},
year = {2019},
journal = {Sensors Journal},
url = {}