You are required to read and agree to the below before accessing a full-text version of an article in the IDE article repository.

The full-text document you are about to access is subject to national and international copyright laws. In most cases (but not necessarily all) the consequence is that personal use is allowed given that the copyright owner is duly acknowledged and respected. All other use (typically) require an explicit permission (often in writing) by the copyright owner.

For the reports in this repository we specifically note that

  • the use of articles under IEEE copyright is governed by the IEEE copyright policy (available at http://www.ieee.org/web/publications/rights/copyrightpolicy.html)
  • the use of articles under ACM copyright is governed by the ACM copyright policy (available at http://www.acm.org/pubs/copyright_policy/)
  • technical reports and other articles issued by M‰lardalen University is free for personal use. For other use, the explicit consent of the authors is required
  • in other cases, please contact the copyright owner for detailed information

By accepting I agree to acknowledge and respect the rights of the copyright owner of the document I am about to access.

If you are in doubt, feel free to contact webmaster@ide.mdh.se

Industrial Requirements on Evolution of an Embedded System Architecture

Authors:


Publication Type:

Conference/Workshop Paper

Venue:

5th IEEE International Workshop on Industrial Experience in Embedded Systems Design


Abstract

Management of obsolete software- and hardware-components along with the addition of new components and functionalities in existing embedded systems can be a very difficult or almost impossible task. If there at the same time is a requirement put on the system that it should be in operation for more than 30 years, then the evolution of the embedded system architecture over such a long duration of time will be an even more challenging problem to solve. A large number of different industries, for example the process and power transmission industries, are faced with this type of challenges on a daily basis. The contribution of our research presented in this paper is a set of questions and answers on how it is possible to replace and update an old control system, with examples inherent in process and power transmission applications. We also look at different methods that can be used during the development of new systems such that they will provide a natural support for evolvability, targeting future control system applications.

Bibtex

@inproceedings{Hallmans2936,
author = {Daniel Hallmans and Thomas Nolte and Stig Larsson},
title = {Industrial Requirements on Evolution of an Embedded System Architecture},
month = {July},
year = {2013},
booktitle = {5th IEEE International Workshop on Industrial Experience in Embedded Systems Design (IEESD13)},
url = {http://www.es.mdu.se/publications/2936-}
}