You are required to read and agree to the below before accessing a full-text version of an article in the IDE article repository.

The full-text document you are about to access is subject to national and international copyright laws. In most cases (but not necessarily all) the consequence is that personal use is allowed given that the copyright owner is duly acknowledged and respected. All other use (typically) require an explicit permission (often in writing) by the copyright owner.

For the reports in this repository we specifically note that

  • the use of articles under IEEE copyright is governed by the IEEE copyright policy (available at http://www.ieee.org/web/publications/rights/copyrightpolicy.html)
  • the use of articles under ACM copyright is governed by the ACM copyright policy (available at http://www.acm.org/pubs/copyright_policy/)
  • technical reports and other articles issued by M‰lardalen University is free for personal use. For other use, the explicit consent of the authors is required
  • in other cases, please contact the copyright owner for detailed information

By accepting I agree to acknowledge and respect the rights of the copyright owner of the document I am about to access.

If you are in doubt, feel free to contact webmaster@ide.mdh.se

Integration of Electronic Components in Heavy Vehicles: A Study of Integration in Three Cases

Fulltext:


Authors:

Joakim Fröberg , Mikael Åkerholm

Publication Type:

Conference/Workshop Paper

Venue:

Proceedings from Systems Engineering/Test and Evaluation Conference, Melbourne, 25-27 September 2006


Abstract

Complexity of in-vehicle computer systems and the availability of computerized mechatronics yield a situation where automotive electronic systems are designed by integration. Since the qualities of a modern vehicle are much dependent on the in-vehicle computer system, integration is a major issue which has proved difficult with respect to assessing quality and cost. OEMs of automotive products want leverage over targeted qualities and the cost of scale when purchasing supplier components. In this paper, we present three cases of integration of mechatronic components into vehicle platforms of Volvo Construction Equipment and focus on the integration of embedded computer systems. The study shows problems areas of communicating architecture constraints, evaluation of components in early phases of development, and lacking definitions of responsibilities. Based on the study, we list four recommended practices to avoid the problems found in the cases. The analysis shows that integration of embedded computers should be considered early in development and in order to reduce project risks, the early assessment of computers need be fairly detailed. From the study we also present driving requirements in design of in-vehicle computer systems.

Bibtex

@inproceedings{Froberg1016,
author = {Joakim Fr{\"o}berg and Mikael {\AA}kerholm},
title = {Integration of Electronic Components in Heavy Vehicles: A Study of Integration in Three Cases},
month = {September},
year = {2006},
booktitle = {Proceedings from Systems Engineering/Test and Evaluation Conference, Melbourne, 25-27 September 2006},
url = {http://www.es.mdu.se/publications/1016-}
}