You are required to read and agree to the below before accessing a full-text version of an article in the IDE article repository.

The full-text document you are about to access is subject to national and international copyright laws. In most cases (but not necessarily all) the consequence is that personal use is allowed given that the copyright owner is duly acknowledged and respected. All other use (typically) require an explicit permission (often in writing) by the copyright owner.

For the reports in this repository we specifically note that

  • the use of articles under IEEE copyright is governed by the IEEE copyright policy (available at
  • the use of articles under ACM copyright is governed by the ACM copyright policy (available at
  • technical reports and other articles issued by M‰lardalen University is free for personal use. For other use, the explicit consent of the authors is required
  • in other cases, please contact the copyright owner for detailed information

By accepting I agree to acknowledge and respect the rights of the copyright owner of the document I am about to access.

If you are in doubt, feel free to contact

Automated Test Mapping and Coverage for Network Topologies


Publication Type:

Conference/Workshop Paper


International Symposium on Software Testing and Analysis


Communication devices such as routers and switches play a critical role in the reliable functioning of embedded system networks. Dozens of such devices may be part of an embedded system network, and they need to be tested in conjunction with various computational elements on actual hardware, in many different configurations that are representative of actual operating networks. An individual physical network topology can be used as the basis for a test system that can execute many test cases, by identifying the part of the physical network topology that corresponds to the configuration required by each individual test case. Given a set of available test systems and a large number of test cases, the problem is to determine for each test case, which of the test systems are suitable for executing the test case, and to provide the mapping that associates the test case elements (the logical network topology) with the appropriate elements of the test system (the physical network topology).We studied a real industrial environment where this problem was originally handled by a simple software procedure that was very slow in many cases, and also failed to provide thorough coverage of each network’s elements. In this paper, we represent both the test systems and the test cases as graphs, and develop a new prototype algorithm that a) determines whether or not a test case can be mapped to a subgraph of the test system, b) rapidly finds mappings that do exist, and c) exercises diverse sets of network nodes when multiple mappings exist for the test case.The prototype has been implemented and applied to over 10,000 combinations of test cases and test systems, and reduced the computation time by a factor of more than 80 from the original procedure. In addition, relative to a meaningful measure of network topology coverage, the mappings achieved an increased level of thoroughness in exercising the elements of each test system.


author = {Per Erik Strandberg and Thomas Ostrand and Elaine Weyuker and Daniel Sundmark and Wasif Afzal},
title = {Automated Test Mapping and Coverage for Network Topologies},
month = {July},
year = {2018},
booktitle = { International Symposium on Software Testing and Analysis},
url = {}