You are required to read and agree to the below before accessing a full-text version of an article in the IDE article repository.

The full-text document you are about to access is subject to national and international copyright laws. In most cases (but not necessarily all) the consequence is that personal use is allowed given that the copyright owner is duly acknowledged and respected. All other use (typically) require an explicit permission (often in writing) by the copyright owner.

For the reports in this repository we specifically note that

  • the use of articles under IEEE copyright is governed by the IEEE copyright policy (available at http://www.ieee.org/web/publications/rights/copyrightpolicy.html)
  • the use of articles under ACM copyright is governed by the ACM copyright policy (available at http://www.acm.org/pubs/copyright_policy/)
  • technical reports and other articles issued by M‰lardalen University is free for personal use. For other use, the explicit consent of the authors is required
  • in other cases, please contact the copyright owner for detailed information

By accepting I agree to acknowledge and respect the rights of the copyright owner of the document I am about to access.

If you are in doubt, feel free to contact webmaster@ide.mdh.se

Test Rig for MEMS-accelerometers

Fulltext:


Research group:


Publication Type:

Conference/Workshop Paper

Venue:

MSW 2010, Micronano System Workshop


Abstract

MEMS-accelerometers are rather cheap, small and reliable motion sensors that have found new application areas and are available in a variety of performance. They exist in many different performance, such as single, dual or triple axis, for high- or low-g application, with analog or digital output, different packages and size etc. Their performance parameters also exist in a wide spectrum, like high sensitivity, bandwidth, noise density, temperature range, shock tolerance etc. Moreover, there are a variety of manufacturers that you can choose from. So when it is time to choose sensor, there are many aspects and parameters to take in the consideration of choosing the right accelerometer. If it is possible to managed to choose one sensor above all others, a question arises. How can you be sure that the chosen sensor fulfils its requirement specification?

Bibtex

@inproceedings{Gerdtman1797,
author = {Christer Gerdtman and Maria Lind{\'e}n},
title = {Test Rig for MEMS-accelerometers},
editor = { G{\"o}ran Stemme, Niclas Roxhed and Wouter van der Wijngaart},
month = {May},
year = {2010},
booktitle = {MSW 2010, Micronano System Workshop},
url = {http://www.es.mdu.se/publications/1797-}
}