You are required to read and agree to the below before accessing a full-text version of an article in the IDE article repository.

The full-text document you are about to access is subject to national and international copyright laws. In most cases (but not necessarily all) the consequence is that personal use is allowed given that the copyright owner is duly acknowledged and respected. All other use (typically) require an explicit permission (often in writing) by the copyright owner.

For the reports in this repository we specifically note that

  • the use of articles under IEEE copyright is governed by the IEEE copyright policy (available at http://www.ieee.org/web/publications/rights/copyrightpolicy.html)
  • the use of articles under ACM copyright is governed by the ACM copyright policy (available at http://www.acm.org/pubs/copyright_policy/)
  • technical reports and other articles issued by M‰lardalen University is free for personal use. For other use, the explicit consent of the authors is required
  • in other cases, please contact the copyright owner for detailed information

By accepting I agree to acknowledge and respect the rights of the copyright owner of the document I am about to access.

If you are in doubt, feel free to contact webmaster@ide.mdh.se

Case-Based Reasoning Applied to Geometric Production Measurements

Fulltext:


Authors:

Ella Olsson, Peter Funk, Alf Andersson

Publication Type:

Conference/Workshop Paper

Venue:

1st International Workshop and Congress on eMaintenance June 22-24, 2010 in Luleå, Sweden

Publisher:

Luleå University of Technology


Abstract

Measurements from products are continuously collected to allow adjustments in the production line to certify a feasible product quality. Case-Based Reasoning is a promising methodology for this type of quality assurance. It allows product measurements and its related adjustments to the production line to be stored as cases in a Case-Based Reasoning system. The idea is to describe an event of adjustments based on deviations in geometric measurement points on a product and connect these measurements to their correlated adjustments done to the production line. Experience will implicitly be stored in each case in the form of uniquely weighted measurement points according to their positive influence on adjustments. Methods have been developed in order to find these positive correlations between measurements and adjustments by analysing a set of historical product measurement and their following adjustments. Each case saved in the case base will be "quality assured" according to this methods and only cases containing strong positive correlations will be used by the system. The correlations will be used to supply each case with its own set individual weights.

Bibtex

@inproceedings{Olsson604,
author = {Ella Olsson and Peter Funk and Alf Andersson},
title = {Case-Based Reasoning Applied to Geometric Production Measurements},
editor = {Kumar , U; Karim, R and Parida, A},
pages = {25--28},
month = {June},
year = {2010},
booktitle = {1st International Workshop and Congress on eMaintenance June 22-24, 2010 in Lule{\aa}, Sweden},
publisher = {Lule{\aa} University of Technology},
url = {http://www.es.mdu.se/publications/604-}
}